SoundaXe® Wooden Perforated
Wooden Perforated Acoustic Panels
Perforated wood panels that cut sound reflections and reverberation, joined by a groove system and available in linear (E) or staggered (V) hole patterns. Made by MMTPL at the Palwal plant, Haryana.
Send the photo to use here
Room before and after SoundaXe® Perforated panels
The problem it solves
What SoundaXe® Perforated panels fix for you
Echo in conference rooms
Reduces echoes and reverberation so speech stays clear.
Recording studios that ring
Hole pattern and backing are specified to the frequencies the room needs.
Reverberant auditoriums and theatres
Cuts reflections across large wall and ceiling areas.
Classrooms and lecture halls
Clearer teaching in educational institutions.
Home theatres
Reverberation control behind a clean wood finish.
Loud restaurants and cafés
Absorbs reflected noise in dining spaces.
Applications
Where SoundaXe® Perforated panels go
Conference rooms
Conference rooms
Clearer speech in meetings.
Recording studios
Recording studios
Tuned hole patterns for studio rooms.
Auditoriums and theatres
Auditoriums and theatres
Large-area reverberation control.
Also used in
- Educational institutionsClassrooms and lecture halls.
- Home theatresClean wood finish with absorption.
- Restaurants and cafésCalmer dining spaces.
Specifications
Technical data
| Manufacturer | MMTPL, Palwal plant, Haryana, India |
| Substrate options | MDF, FR MDF, HDF, HDHMR |
| Perforation patterns | E16/16/6, E32/32/8, V16/16/8; others to order |
| Pattern types | Linear (E) or staggered (V) |
| Standard sizes | 2440 x 1220 mm, 595 x 595 mm |
| Thickness | 12 mm, 15 mm, 18 mm |
| Fire rating | EN 13501-1, Class B s1 d0 |
| Formaldehyde class | EN 13986: E1 |
| Installation system | Groove joint with acoustic substrate backing |
| Size tolerance | ±5% |
| Country of origin | India |
Soundproofing: the fix for every sound problem
3-layer soundproofing
- 1
Layer 1: SoundBlanket® MLV
The dense barrier that isolates sound and stops it passing through walls, ceilings and floors.
- 2
Layer 2: BassBloc®
High-density sound absorber over the MLV that controls low-frequency noise.
- 3
Layer 3: Echsorbix®, SoundaXe® or WDWL®This product
The final acoustic finish: Echsorbix® PET felt, SoundaXe® wooden acoustics or WDWL® wood wool panels.
Layer 2 can also be covered with gypsum or cement board before adding the final acoustic layer.
Different thickness in each layer will give different STC and NRC levels.
Custom patterns
Hole patterns cut to order
Beyond the standard E16/16/6, E32/32/8 and V16/16/8, hole patterns are tailored to specific acoustic needs and cut to order. Send us the room and we will specify the pattern.
FAQs